Polished Concrete & Epoxy Floors Kansas City
Garage floors, retail spaces, warehouses & homes — high-performance floor coatings and polished concrete by KC’s specialists
Kansas City’s Polished Concrete & Epoxy Floor Specialists
Your concrete floor is an asset — it doesn’t have to be dull gray. Polished concrete and epoxy floor systems transform existing slabs into high-performance, visually striking surfaces that are easier to clean, more durable, and significantly more valuable than bare concrete. We serve homeowners, business owners, and property developers across the Kansas City metro with the full range of floor systems — from a basic garage floor coating to a high-gloss retail showroom polish.
Polished Concrete
Mechanically ground and polished using progressively finer diamond tooling until the surface achieves a mirror-like finish. No topical coating — the shine comes from the concrete itself. Used in retail, restaurants, offices, and upscale homes. LEED-contributory, low maintenance, never needs waxing.
Epoxy Floor Coatings
100% solids epoxy applied in 2–3 coats creates a seamless, chemical-resistant surface. Available in solid colors, metallic effects, quartz broadcast, and decorative flake. Ideal for garages, workshops, basements, medical facilities, and commercial kitchens.
Polyaspartic & Polyurea Topcoats
Faster cure times than epoxy (1 day), superior UV resistance (won’t yellow in sunlight), and better abrasion resistance. Used as a topcoat over epoxy base, or as a standalone system where fast return-to-service matters.
Metallic Epoxy
Metallic pigments suspended in epoxy create flowing, three-dimensional effects that look like marble, lava, or liquid metal. Each floor is unique. Popular for showrooms, restaurants, home gyms, and entertainment spaces.
Quartz & Flake Broadcast
Colored quartz or vinyl flake broadcast into wet epoxy, then sealed with a clear polyaspartic topcoat. Provides texture, slip resistance, and a commercial look. Standard for garage floors, basements, and light industrial use.
Industrial Floor Coatings
Heavy-duty urethane cement, novolac epoxy, or industrial polyurea systems for manufacturing, food processing, and chemical-exposure environments. These systems resist hot tire pickup, forklift traffic, and chemical spills that standard epoxy cannot handle.
Polished Concrete Gloss Levels — Choosing the Right Sheen
Polished concrete is finished at different gloss levels depending on the application. Here’s what each looks like and where it’s used.
400 Grit — Matte
Low sheen, hides scratches well. Best for high-traffic retail, warehouses, and schools.
800 Grit — Satin
Soft glow, most popular finish. Offices, showrooms, modern homes, restaurants.
1500 Grit — Semi-Gloss
Visible reflections, premium look. Retail flagship stores, upscale hospitality.
3000 Grit — High Gloss
Mirror-like finish, deepest aggregate exposure. Showrooms, galleries, luxury homes.
Polished Concrete vs. Epoxy — Which is Right for You?
Both are excellent floor systems, but they serve different needs. Here’s a direct comparison.
✨ Polished Concrete
- Permanent — ground into the slab itself
- No coating to peel, chip, or reapply
- Lower lifetime cost — no recoating
- LEED-contributory, sustainable
- Must have a sound existing slab
- Color = concrete + dye only
- Best for: retail, office, restaurant, home
- Cost: $3–$8/sq ft depending on grit level
🛡️ Epoxy / Polyaspartic
- Topical coating — applied over existing slab
- Can resurface damaged or pitted slabs
- Wide range of colors and effects
- Chemical and stain resistant
- Requires recoating every 5–10 years
- Metallic, flake, and quartz options
- Best for: garages, basements, workshops
- Cost: $4–$12/sq ft depending on system
🏭 Industrial Systems
- Urethane cement, novolac, or polyurea
- Resists thermal shock and chemicals
- Food-safe and USDA-compliant options
- Withstands forklift traffic daily
- Anti-static options for electronics
- Thicker build for impact resistance
- Best for: manufacturing, food processing
- Cost: $8–$20/sq ft depending on system
2026 Polished Concrete & Epoxy Floor Pricing — Kansas City
Pricing depends on the system, existing slab condition, prep required, and square footage. Larger projects get better rates per square foot.
| Floor System | Finish / Spec | Price Range | Best For |
|---|---|---|---|
| Basic Polished Concrete | 400 grit, densifier, matte seal | $3–$5/sq ft | Warehouses, light industrial |
| Standard Polished Concrete | 800–1500 grit, dye option | $5–$8/sq ft | Retail, office, restaurant |
| Premium High-Gloss Polish | 3000 grit, full aggregate exposure | $8–$12/sq ft | Showrooms, luxury homes |
| Garage Floor Epoxy (Flake) | Base coat + flake + poly topcoat | $4–$7/sq ft | Residential garages |
| Metallic Epoxy | Metallic pigment + poly topcoat | $7–$12/sq ft | Showrooms, basements, gyms |
| Quartz Broadcast System | 2 coat epoxy + quartz + poly | $5–$9/sq ft | Commercial, medical, schools |
| Polyaspartic Coating Only | Fast-cure, UV-stable topcoat | $4–$6/sq ft | Garages, light commercial |
| Industrial Urethane Cement | 3/16″–1/4″ build, chemical resist | $10–$18/sq ft | Food processing, manufacturing |
| Concrete Grinding & Prep Only | Shot blast or grind, no coating | $1.50–$3/sq ft | DIY topcoat prep |
* Extensive crack repair, moisture mitigation, or heavily contaminated slabs will add $1–$3/sq ft to prep costs. All estimates are free and on-site.
Our Floor Installation Process
Surface prep is 80% of the job. A beautiful finish on a poorly prepared slab fails in months. Here’s how we do it right.
Slab Assessment
We test for moisture vapor emission (critical in KC’s climate), check slab hardness and existing coatings, identify cracks, pitting, and high spots that must be addressed before coating.
Surface Preparation
Shot blasting or diamond grinding opens the concrete profile to the correct CSP (Concrete Surface Profile) for the system. All cracks are filled, control joints are addressed, and oil contamination is treated.
Moisture Mitigation (if needed)
Kansas City’s clay soil holds moisture. If vapor emission exceeds 3 lbs/1,000 sq ft/24 hr, we install a moisture-vapor barrier primer before the floor system — skipping this step causes coating delamination.
Base Coat Application
Epoxy base coat or first diamond grind pass applied to spec thickness or grit level. Broadcast material (flake or quartz) is distributed into wet epoxy for broadcast systems.
Build Coats & Topcoat
Additional coats applied per system design. Final polyaspartic or polyurethane topcoat provides the finished surface, UV resistance, and chemical protection.
Cure & Return-to-Service
Foot traffic typically in 24 hours, vehicle traffic in 72 hours for epoxy. Polyaspartic systems allow return in as little as 6–8 hours. We give you a written return-to-service schedule.
What Kansas City Customers Say About Our Polished & Epoxy Floors
“Epoxy floor in our 3-car garage looks better than showroom quality. Best KC prepped the concrete properly before coating — no peeling or bubbles after a full year of use.”
— Steve A., NKC
“Polished concrete in our home office — Best KC achieved a beautiful satin finish that’s easy to clean and looks high-end. Way better than any flooring alternative at the price.”
— Rachel T., Lenexa
Polished & Epoxy Floor FAQ — Kansas City
Can epoxy be applied over my existing garage floor?
Yes — in most cases. We need to grind or shot blast the existing surface to open the concrete profile and ensure adhesion. If the existing floor has a previous coating that is peeling, it must be fully removed first. We also test for moisture vapor emission, which is especially important in Kansas City basements and ground-level slabs. If the slab passes our moisture test, we can coat it. If not, we apply a moisture-vapor barrier primer first.
How long does a garage floor epoxy last in Kansas City?
A properly applied 100% solids epoxy with a polyaspartic topcoat typically lasts 10–15 years in a residential garage under normal use. Hot tire pickup resistance, UV stability (polyaspartic doesn’t yellow), and chemical resistance all depend on the quality of the system. We use commercial-grade materials and warrant our garage floor coatings for 10 years against peeling and delamination.
What is the difference between 100% solids epoxy and water-based epoxy?
100% solids epoxy contains no solvents or water — all of it cures into the final coating, resulting in maximum thickness and hardness. Water-based epoxy loses 50–80% of its volume as the water evaporates, leaving a much thinner, softer film. The big-box store epoxy kits are water-based. We only use 100% solids commercial systems — the cost is higher but the performance difference is massive.
Is polished concrete slippery?
At lower grit levels (400–800), polished concrete has a slip resistance comparable to a good tile floor and is not considered slippery in dry conditions. At high-gloss levels (1500–3000 grit), it can be slippery when wet — a penetrating slip-resistant sealer or surface additive (aluminum oxide) can be applied to increase wet traction if needed. We discuss slip resistance requirements during consultation for every project.
Can you fix cracks in my concrete floor before coating?
Yes — this is part of our standard prep process. We fill structural cracks with semi-rigid polyurea crack filler, which flexes with the concrete rather than cracking again. Surface cracks and pitting are filled with epoxy filler and spot-ground flush. Very large cracks or sections with significant heaving may require slab repair or replacement before coating.
Concrete Services Across the KC Metro
We serve homeowners and businesses throughout Johnson County KS, Jackson County MO, Clay County MO, and surrounding areas.
Free Floor Consultation — Kansas City
We’ll visit your space, test your slab, and recommend the right floor system for your use case and budget.
Related services: Driveway Installation · Commercial Concrete · Concrete Repair · Concrete Leveling
